
From Blackhawk master suites to Old Town remodels, we build curbless and custom tiled showers waterproofed to code, with HOA and town approvals handled for you.
Transform your bathroom – faster, easier at a price more affordable than you think. We offer an expansive selection of affordable showers and custom accessories. Professionally installed and ready to use in as little as a few days!
Tap images to enlarge
See More Recent Projects →License #989637 | 4.9/5 across 921+ reviews | Licensed, bonded & insured | A+ BBB rated
A Danville shower remodel done right is a fully waterproofed system, not a surface swap — and GVD Renovations & Remodeling builds them across Danville (94506 and 94526) with in-house crews, fixed itemized pricing, and permit handling from design to final inspection. We build both family tub-to-shower conversions and estate primary-suite enclosures across Danville, from Sycamore to Blackhawk.
Most Danville showers finish in one to two weeks. You get one project manager, a written proposal, and a design showroom to select tile, glass, and fixtures before work starts.
Request your free in-home estimate and firm project quote →
We take the shower down to the studs, fix any hidden water damage, and rebuild it as a fully waterproofed system: a new pan or curbless base, a waterproofing membrane (Schluter-Kerdi or RedGard), tile or solid-surface walls, a new valve and drain, and framed or frameless glass. Danville showers split between practical tub-to-shower conversions in Greenbrook and Sycamore family homes and large tiled primary-suite enclosures in Blackhawk and Diablo. In gated Blackhawk, the HOA’s architectural review can apply to exterior-affecting work and material staging, so we plan any window or vent change and deliveries around those rules.
Scope and finish drive shower cost far more than size. These Danville ranges are confirmed in your itemized estimate:
| Shower scope | Typical Danville range |
|---|---|
| Solid-surface or acrylic replacement | $5,500–$10,000 |
| Custom tiled walk-in shower | $12,000–$24,000 |
| Tub-to-shower conversion | $8,000–$15,000 |
| Curbless / ADA walk-in shower | $14,000–$27,000 |
What drives cost up in Danville: large tiled primary-suite enclosures, frameless glass, slab stone, HOA-coordinated exterior changes in Blackhawk, and tub-to-shower conversions in family baths. Labor for tile setting and waterproofing is the largest share of the total, and custom tile, slab stone, and frameless glass are the priciest materials.
Most showers finish in one to two weeks: demolition (1 day), plumbing and pan set (1–2 days), waterproofing and inspection (1–2 days), tile or panel install (2–4 days), then glass, fixtures, and final (1–2 days). Frameless glass is templated after tile and ordered custom, which adds about one to two weeks of lead time before it installs.
California requires a permit when a shower project moves plumbing, alters the drain or valve, or changes structure; a like-for-like fixture swap does not. We pull the permit through the Town of Danville Building Division and schedule the inspections so you never file paperwork.
In gated Blackhawk and Diablo, HOA architectural review can apply to exterior-affecting work and material staging on top of the town permit, so we plan deliveries and any window or vent change around those rules.
Skipping the permit is a resale liability: an inspector can order tile opened to verify the waterproofing and drain, retroactive fees and penalties apply, and buyers' inspectors flag unpermitted wet-area work — which can delay escrow. Insurers can also deny claims tied to unpermitted plumbing.
Most shower failures are not cosmetic — they start behind the tile. We build to the assembly that lasts: a pre-sloped pan, a bonded waterproofing membrane up the walls and over the curb, sealed corners and penetrations, and waterproofed niches. That is the difference between a shower that stays dry for decades and one that quietly rots the framing and subfloor. It is also the step lowball bids skip, because it is buried and never seen — until it leaks.
Judge a contractor on verifiable facts: an active CSLB license (verify at cslb.ca.gov), general liability and workers' compensation, an itemized written proposal, in-house crews, a real Danville-area portfolio, and how they waterproof. Walk away from anyone who quotes over the phone, refuses to pull permits, or "waterproofs" with only a surface product over drywall. In Danville, ask about Blackhawk and Diablo HOA coordination and scheduling around an occupied family home.
For aging in place, we build curbless and low-threshold showers with slip-resistant floors, grab-bar blocking in the walls, a built-in bench, a handheld sprayer, and a linear drain that keeps water off the bathroom floor. Curbless designs also work for wheelchair access. These are among the most requested Danville shower projects for owners planning to stay in their homes.
We also handle full bathroom remodels, kitchen remodels, room additions, and whole-home renovations, plus siding and replacement windows across Danville and the East Bay. Combo discounts are available when you bundle projects — ask during your estimate.
Serviced ZIP codes: 94506 and 94526 Insurance and licensing: Licensed, bonded, and insured by the California CSLB, with workers' compensation and general liability coverage. Discounts: Combo, senior, and military/veteran discounts available; senior accessibility upgrades (curbless entries, grab bars, benches) qualify. Financing: Through third-party lenders; approval, rates, and terms depend on credit profile, and checking eligibility does not affect your credit score.
Tell us your shower's size, current problems, and target budget. We come to your home, measure, and return an itemized quote you can compare line by line.
We bring the same crews, materials, and workmanship to every community around Danville.
A solid-surface or acrylic replacement runs $5,500–$10,000; a custom tiled walk-in runs $12,000–$24,000; a tub-to-shower conversion is typically $8,000–$15,000. Curbless, ADA, steam, and slab-stone builds sit at the top of the range.
Most Danville tub-to-shower conversions run $8,000–$15,000, depending on tile, glass, and whether the drain and valve move. Converting an unused tub reclaims floor space and improves accessibility.
Yes, when the work moves plumbing, alters the drain or valve, or changes structure. We pull the permit through the Town of Danville Building Division. A like-for-like fixture swap does not require one.
Most showers finish in one to two weeks. Frameless glass is templated after tile is set and ordered custom, which adds about one to two weeks of lead time before it installs.
Most shower failures start behind the tile, not on it. A pre-sloped pan, a bonded membrane up the walls and over the curb, and sealed niches and corners are what keep water out of the framing and subfloor — the step lowball bids most often skip.
Yes. We share a portfolio, before-and-after photos, and contactable references across Danville and nearby Contra Costa communities during the in-home estimate.























